The best way to remove silicone sealants from any surface is to use the right equipment. Fortunately, with just a little preparation, you can quickly and easily remove it from any surface without having to spend hours on the job by using a Silicone sealant remover. Find out more about Silicone sealant remover at a site like CTEC. Whether you are dealing with aluminium, plastic, metal, wood, or composite glass, you can quickly and easily remove it without having to spend hours on the project.
You should hold down the applicator blade. With the blade at an approximate 45-degree angle, slide the applicator blade over the surface to be treated. You want to work along the edge of the surface to ensure it is clean and free of debris. Once you have applied the removing agent, you should allow it to sit for a short amount of time. This will help to loosen the excess silicone from the surface and allow you to remove it with ease. If you are using a compressor, be sure to set the air pressure low to prevent damage to the surface if there is any build-up of the silicone.
When you are ready to remove the silicone from the surface, this is where the applicator blade comes in handy. You should be able to apply it to the surface in one fluid motion but be careful to not apply too much pressure when lifting off the remaining silicone.« Back